From OpenLiteSpeed Wiki
(Redirected from Help:Install:Quick Install Guide)
Minimum system requirements
- Operating System:
- Linux(i386): kernel 2.4 and up, glibc-2.2 and up
- CentOS: 5 and up
- Ubuntu: 8.04 and up
- Debian: 4 and up
- Solaris(x86): SunOS 5.8 and up
- FreeBSD(i386): 4.5 and up
- MacOSX: 10.3 and up
- Intel: 80486 and up
- PowerPC: PowerPC G4
- Memory: 32MB and up
- Installation: 200MB
- Runtime: 300MB and up, swapping space depends on usage.
Installation of OpenLiteSpeed
The quick and easy way to install OpenLiteSpeed is through our OpenLiteSpeed repository. OpenLiteSpeed Installation can also be performed in a command line terminal as detailed below.
OpenLiteSpeed will normally be installed by root user at default location at /usr/local/lsws. For production use, it should be installed into a system directory which requires root access or using sudo). Openlitespeed can also be installed into a home directory by a non-privileged user. The following instructions will assume OpenLiteSpeed to be installed by root. For non-root user installation, please refer here
OpenLiteSpeed requires pcre, expat, openssl, geoip, udns, and zlib to be installed before you run the
configure command. Our dependencies article gives steps for installing these packages in a number of different OSs.
Below you will find instructions for installing the packages depending on your system.
CentOS 5, 6 and 7
You may need to enable EPEL repository to get access to some of these packages.
yum install epel-release yum install gcc gcc-c++ make autoconf glibc rcs automake libtool yum install pcre-devel openssl-devel expat-devel geoip-devel zlib-devel udns-devel
sudo apt-get update sudo apt-get install build-essential sudo apt-get install rcs libpcre3-dev libexpat1-dev libssl-dev libgeoip-dev libudns-dev zlib1g-dev libxml2 libxml2-dev libpng-dev openssl
ports. Here are some examples using
cd /usr/ports/devel/pcre; make install clean; rehash; cd /usr/ports/devel/rcs; make install clean; rehash; cd /usr/ports/net/GeoIP; make install clean; rehash; cd /usr/ports/dns/udns; make install clean; rehash; cd /usr/ports/textproc/expat2; make install clean; rehash; cd /usr/ports/security/openssl; make install clean; rehash;
Mac OS X
- Install Xcode from https://developer.apple.com/xcode/ (This requires registering with your AppleID.)
- Download Command Line Tools for Xcode from the Apple Developer page above.
- Install MacPorts from http://www.macports.org/install.php#pkg
sudo port install pcre expat openssl rcs libgeoip zlib libudns
- Download the package into a convenient location and decompress it.
- Go to the installation directory, compile, and install the package as the root user (for production use):
cd openlitespeed-1.x.x ./configure make && make install
Note1: A number of options and settings can be configured pre-installation. Use
./configure --help to see the configurable options.
- By default, the Installer will install a sample site on port 8088 and set the WebAdmin console (the LiteSpeed GUI) to port 7080. (user: admin password: 123456)
Note2: On newer versions of OS X, you may have to use
./configure CPPFLAGS=-I/opt/local/include LDFLAGS=-L/opt/local/lib --with-openssl=/opt/local as recent versions of OS X have deprecated usage of the OpenSSL library.
Note3: Check here on how to enable HTTP2 support during the configure.
Note4: To install as a non-root user and to a home directory, you will need to set prefix at configure. For example, ./configure --prefix=/home/$USER1/lsws
If you run into errors or problems during installation, please consult our errors article for common problems.
OpenLiteSpeed use php build with LSAPI. For CentOS/Ubuntu/Debian, LSPHP can be installed through RPMS. If RPMS are not available for your system, such as FreeBSD and Mac OS, you may compile PHP by yourself.
- On CentOS, the shipped php binary /usr/local/lsws/fcgi-bin/lsphp can be run but it is only for testing purpose. On FreeBSD, Mac OS X, and Ubuntu the shipped PHP (for CentOS) will not run any all. On any case, you need to follow the above steps to setup PHP properyly.
- The default installation directory is /usr/local/lsws.
- For detailed information on controlling the server processes, please see the administration guide.
- To start the server, simply run
/usr/local/lsws/bin/lswsctrl start. (To stop it, run
- A sample site should be running on the server.
- To access your site, point your browser to http://[address]:8088/, [address] being the IP address or domain name of your web server machine. Use "localhost" if the server is on the machine you are using. By default, OpenLiteSpeed runs on port "8088".
- A congratulations page linked to other testing pages should load into the browser when pointed to the above address. If not, try testing the WebAdmin interface.
- The default port for the WebAdmin console is 7080.
- Plug https://[address]:7080/, into your browser to go to the WebAdmin interface.
- Remember the "https://" and that for [address] you can use "localhost" if you're currently using the machine the server is on.
- A login page should load. The defaults for the administrator's user name and password are "admin" and "123456".
- For detailed information regarding configuration, please refer to our Configuration Guide, or click the "Help" link at the top of each page.
- If your server uses a firewall, please make sure that localhost is trusted.
- For instance, Linux with IPTables should include a rule ALLOW INPUT from LO.
- If your website and the WebAdmin console are inaccessible, please take a look at the error log
- If there is a TCP port conflict with other server applications, you will need to stop the application currently running on port 7080. The following command can be used to check port 7080:
netstat -an | grep 7080. If the port is available, the command will produce no output.
- If the swapping directory is not writable, you can either grant writing permission for the swapping directory to the user whom the web server is running as, or change the swapping directory's configurations manually. The swapping directory is configured in the server's XML configuration file:
/usr/local/lsws/conf/httpd_config.xml. Search the XML file for "swappingDir". The default location for the swapping directory is
- If you still have problems with installation, please check the OpenLiteSpeed Development Group.
- Stop OpenLiteSpeed if it is running:
- Remove the install directory:
rm -rf /usr/local/lsws
You can change your OpenLiteSpeed version by simply installing a different version of OpenLiteSpeed. Re-installing will not affect your configuration files.